Make sure the hub is powered and connected to the PC before attempting to connect the AG304 AccuLine camera USB 3.0 cable to the hub. Then plug the USB 3.0 cable of the AG304 into the hub. If a longer cable is needed, use a high performance USB 3.0 cable no longer than 3 meters (9 feet) to connect a wall-powered USB 3.0 hub to the USB 3.0 port on the PC. Use only the USB 3.0 cable supplied with the AG304.You may need to check the specifications for your particular PC, as USB 3.0 ports and USB 2.0 ports look the same. Connect to USB 3.0 port only, not USB 2.0 port.Make sure that the PC system configuration settings are set to High Performance, Turn off any power-savings.Requires the latest GTXpro (GTX-423) print driver.Display Resolution XGA (1024x768) or higher.

This Software only works on Windows® 10 (64bit), and or Windows® 11 (64bit) *LAN connection only.

It is very important to reboot the computer when prompted during the Installation process.

Unplug both camera and GTXpro (GTX-423) from the computer.

Make sure you are running the latest firmware on the GTXpro (GTX-423) printer first! This download includes the following items:

Supports Windows® 11 (64bit) *LAN connection only.

If you are running both a GTXpro (GTX-423) printer and a GTX (GTX-422) printer driver from the same PC, you will need to update the (GTX-422) to the latest driver and firmware.

The system will select the OS automatically. Next open the “GTXpro-1.8.0_win” folder and double click the setup.exe file. When you initially install the driver make sure the GTXpro (GTX-423) printer is not plugged into the PC. (This tool is for Windows® operating system computers only) After unzipping the file, download and run the 541_782_GT3_GTX_GTXpro_Uninstall_Tool and double click on the BrRemPnP.exe (the only icon in color) executable file to run the tool.

Unplug the USB cable from the printer to the PC and check to make sure there are no documents stuck in the printer queue. This firmware CAN ONLY BE LOADED on a GTXpro (GTX-423) and NOT a GTX (GTX-422) A monitor display of XGA (1024 x 768) or higher is required. This driver requires CPU of 2.0 GHz or better and a minimum of 4 GB of RAM. This driver is compatible with Windows® 8.1 (64bit), Windows® 10 (64bit), and or Windows® 11 (64bit) *LAN connection only. Update the print driver to latest before updating the firmware.ĭownload “GTXpro-1.8.0_win” and extract it to your desktop.

Sharp driver uninstall tool